- 1 What is the significance of the colored bands on resistors?
- 2 What does the third Coloured band on a resistor represent?
- 3 How do you read a 5 band resistor color code?
- 4 How do I know what resistor to use?
- 5 What does the fourth color band on a resistor mean?
- 6 What do you call to the 4th band of a resistor?
- 7 Which resistor will prevent the most current flow?
- 8 How do you calculate color code resistance?
- 9 What resistor do I need for LED?
What is the significance of the colored bands on resistors?
Resistor Color Coding uses colored bands to quickly identify a resistors resistive value and its percentage of tolerance with the physical size of the resistor indicating its wattage rating.
What does the third Coloured band on a resistor represent?
Three or Four Band Resistors On a three or four-band resistor, the third band represents the multiplier. This multiplier will basically shift your decimal place around to change your value from mega ohms to milliohms and anywhere in between. The fourth color band signifies tolerance.
How do you read a 5 band resistor color code?
If the colors on a 5 band resistor is in this order: brown, green, red, blue and violet (as shown in figure). The values of color bands will be like this: Brown = 1, Green = 5, Red = 2, blue = 106, Violet = 0.10%.
How do I know what resistor to use?
A rule of thumb is to find a resistor with twice the power rating. Here I would choose a 250 mW resistor since those are the most standard ones. Usually, you can just use the cheapest resistor you can find with the correct power rating.
What does the fourth color band on a resistor mean?
The fourth color band indicates the resistor’s tolerance. Tolerance is the percentage of error in the resistor’s resistance, or how much more or less you can expect a resistor’s actual measured resistance to be from its stated resistance.
What do you call to the 4th band of a resistor?
4 Band Resistor Color Code The 4-band resistor color code is the most commonly used resistor. Similar to the 3 band resistor, the first two bands always give the first 2 digits of the resistance value. The third band represents the multiplier while the fourth band represents tolerance.
Which resistor will prevent the most current flow?
Which resistor will prevent the most current flow The correct answer is 1000 | Course Hero.
How do you calculate color code resistance?
Reading and Determining the Resistor Value Hold the resistor with the gold or silver band to the right and read the color codes from the left to the right. Select the color codes from the bands on the resistor. Read the colors from left to right. The resistance value based on the color code provided is now displayed.
What resistor do I need for LED?
LEDs typically require 10 to 20mA, the datasheet for the LED will detail this along with the forward voltage drop. For example an ultra bright blue LED with a 9V battery has a forward voltage of 3.2V and typical current of 20mA. So the resistor needs to be 290 ohms or as close as is available.